They don't discharge linearly When at 100%, it sits in a high-voltage saturation phase
As it begins to lose power, the terminal voltage drops very slowly
The wall charger determines the voltage and the laptop dictates the amperage.
This means that amperage is drawn as needed
Plugging and unplugging the cable causes strain fatigue, leading to the outer sleeve of the cable being pulled away
Never pull on the actual cable; pull on the hard plastic head
Don't roll it around the power brick, it twists the internal wires.
Loop the cable in loose circles, letting the wire curve as it will
Standardized; so any usb-c cable will fit any port.
Even if your charger has a higher wattage than necessary, the laptop will tell it not to give it more than it can handle
Same with voltage. This makes it impossible to fry a device using a usb-c charger with too much voltage or wattage!
This is done through a digital handshake called USB Power Delivery
USB-c used to only be able to deliver 100W. Now it can go up to 240W.
The barrel plugs are the traditional laptop plugs. These are not standardized.
If you buy a replacement