This is the most common reactor type
Max temp: 350C Efficiency: 32–34% (for heat to electricity conversion)
Everyone knows how to make them Easy to acquire parts Regulations are streamlined Water is easy to work with
Water has a low boiling point Typically you want the reactor to work above 300C In order to use water, you need to operator the reactor at a very high pressure PV = nRT
The high pressure requires more expensive pressure vessels, and increases the danger of leaks
Water is kept at 150x atmospheric pressure Water is the neutron moderator
Reactor must be shutdown while refueling
Uses heavy water as coolant and moderator Heavy water absorbs fewer neutrons, allowing natural uranium to be used as fuel
Reactor can be refueled while it operates (continuous refueling)
Water is kept at 75x ap
Water is allowed to boil, and is sent directly to the turbine — there's no secondary coolant
The water also serves as the neutron moderator
Reactor must be shut down while refueling
Water coolant boils and is primary coolant
Graphite is the neutron moderator; it absorbs fewer neutrons
Continuous refueling
Can be operated at a higher temperature This leads to higher energy conversion efficiency
Max temp: 800–850 C Efficiency: 40–50%
CO2 or He is used for coolant Graphite neutron moderator
Low pressure
Coolants: Na, Pb, lead-bismuth
These coolants aren't good at moderating neutrons So the core has a lot of fast neutrons
These fast neutrons can actually be used to create new fuel
Lead-bismuth creates radioactive material Lead / lead-bismuth are heavy and corrosive at high temperatures
High temp allowed, high efficiency Low pressure
The reactor vessel contains the core
The reactor core contains the nuclear fuel Primary coolant is circulated through the core. The heat goes into the coolant, and is transferred to the steam generator
The steam generator is a dense bundle of metal tubes surrounded by the secondary coolant (typically water) The 2nd coolant boils, producing steam, which goes into a turbine connected to a generator
The turbine turns, uses EM induction to produce electricity, which goes to the power grid
The steam that exits the turbine is sent into a condenser, converting it back into water, which is then sent back into the 2nd coolant area
The cooling of the condenser is provided by an external water source, typically a river, lake, or ocean. But it can also be done using cooling towers, which cool using the atmosphere
Control rods absorb neutrons. By pulling them in/out of the core, you control the amount of fission happening
Neutron moderators can slow down the speed of neutrons, turning them into thermal neutrons. This can help the fuel work more efficiently. Reactors that have these moderators are called thermal reactors
Uranium needs thermal neutrons, but something like plutonium doesn't Plutonium reactors are called fast reactors
Fast reactors actually can't use water as a primary coolant, because it slows the neutrons too much