Let π : E → M be a fiber bundle. A local section of the bundle is a pair (U, f), where U ⊆ M is an open set and f : U → E is a section of the bundle: π ∘ f = idU
Global sections are the case where U = M. Such sections don't always exist, which is why local section are useful.
Let f : M → E be a section of a fiber bundle. Take any open set around a point p ∈ M , U(p) and pick local coordinates xi. Since we have a fiber bundle, the local coordinates on E will look like (xi, yα) , where yα are the coordinates of the typical fiber F.
In local coordinates, the section has the form f(x) = (x, ϕ(x)) where ϕ : U → F. Then since F has local coordinates, we can view ϕ in local coordinates as ϕα(x1, …, xn), where each ϕα is now a map from ℝn → ℝ. We can thus take its derivative, which we define to be the partial derivative $$ \partial_{i} \phi^{\alpha} = \dfrac{\partial \phi^{\alpha} }{\partial x^{i}} $$
This derivative is coordinate dependent — it's very physics-y. There's no way to say that a section is constant — it can look like it has zero derivative in one trivialization, but then have non-zero derivative in another.
Connections solve this problem — they essentially pick a certain section to be equal to zero (like picking a certain section to be light) and then forcing everything else to mold around that.
Consider the bundle TM → M. We take the first jet space J1(TM). The elements of this jet space correspond uniquely to horizontal subspaces (which are used to define Ehresmann connections). So a section Γ : TM → J1(TM) is a choice of horizontal subspace at each point in the tangent bundle.
In local coordinates on the tangent bundle (xμ, vλ), we can express the section Γ(xμ, vλ) = (xμ, vλ, Γμνλ(x)vν)
Gauge theory: The local coordinates are
also the same as picking a gauge
Let π : E → M be a smooth fiber bundle, and let Γ(p) be the space of local sections whose domains contain p ∈ M.
Two smooth sections f, g ∈ Γ(p) are k-equivalent if all of their partial derivatives up to order k are equal at p. In particular, f(p) = g(p).
Jets: The equivalence class of local
sections under the jet equivalence is called a k-jet, and is denoted jpk.
Given f ∈ Γ(p), we
denote the equivalence class of this element by jpkf.
Let π : E → M be a fiber bundle, and let p ∈ M. The kth jet manifold of π is the set Jk(π) = {jpkf ∣ p ∈ M, f ∈ Γ(p)}
Let π : E → M be a fiber bundle and let f : M → E be a section. The kth jet prolongation of f jkf : M → Jk(π) is defined by
(jkf)(p) = jpkf = (p, f(p), ∂if(p), ∂ijf(p), …, ) where in the last equation we wrote the jet in the induced local coordinates of the jet space.
The coordinates on the jet bundle are just formal symbols. There's no fixed underlying function on the jet spaces that has its derivatives being taken. Instead, for any fixed section of the original bundle E → M, you perform prolongation in order to turn it into an actual function living on the jet space.
Equivalence classes: Because the points
on the jet bundle are, by definition, equivalence classes of sections
and their derivatives, we have a built in way of moving a given section
onto the jet space.
Functions on jet space: If we have some
F : Jk(π) → ℝn
representing a differential equation, we can plug in any section f : M → E by doing
the precomposition F ∘ j−k(f) : M → Jk(π) → ℝn
Now if we have a submanifold given by the zero set of a function on the jet space F, a solution to the differential equation is a section f such that its prolongation lies entirely within said submanifold: F ∘ jpk(f) = 0, ∀p ∈ M
Problem: What happens if we have a
solution to the differential equation that doesn't come from a section
of the original bundle? How do we just isolate the proper solutions?
This is where contact forms come in
Consider a vector field on E Q : E → TE
Let Ω1(Jk(π)) be the one-forms of jet space. The space of contact forms is the subspace {θ ∈ Ω1(Jk(π)) ∣ θ(djkf) = 0, ∀f ∈ Γ(M)}
where djkf : TM → TJk(π) is the pushforward (differential) (not the exterior derivative) of the prolongation
Cartan distribution: Let p ∈ Jk(π).
The kernels of all contact forms carve out a subspace of the tangent
space called the Cartan distribution
Local coordinates: The local
coordinates on the jet space induce a basis of basic contact
one-forms θI for all
multi-indices I of order ≤ k − 1. θIα = duIα − uIjαdxj
where α corresponds to the
coordinates on the bundle E,
and Ij means
appending j to the multi-index
I.
Since the jet space is a smooth manifold, we can define differential forms on it: they're just sections of the exterior powers of the cotangent bundle: ⋀ℓTp*Jk(π) → Jk(π)
Local coords: θ = du − ujdxj.
The condition θ = 0 on all
prolongations, means that df = ∂ifdxi
for all sections f. In other
words, the coordinate uj on the jet
space actually acts like the derivative on all sections f : M → E.
Similarly, the other contact forms assure that the other coordinates of
the jet space act like derivatives of sections of the original
bundle.
Consequence: Now, it turns out that
things which satisfy the differential equation carved out by some
submanifold of the jet space will be actual prolongations if and only if
all of the contact forms vanish on them.
Because we have θIα = duIα − uIjαdxj, we can write duIα = θIα + uIjαdxj.
So the ordinary exterior derivative on the jet space breaks down into the sum of the contact forms and the exterior derivatives on the coordinate part of the jet space.
Writing the definition of the ordinary exterior derivative for a smooth function on the jet space
df = ∂ifdxi + ∑|I| ≥ 0∂uIαfduIα
we can substitute in duIα = θIα + uIjαdxj to find
df = (∂if + ∑|I| ≥ 0uIiα)dxi + ∑|I| ≥ 0∂uIαfθI
Horizontal: We define the horizontal
differential as dHf = (∂if + ∑|I| ≥ 0uIiα)dxi
Vertical: We define the vertical
differential as dVf = ∑|I| ≥ 0∂uIαfθI
Higher degrees: We can seee how to
extend these formulas to higher degrees by simply taking the ordinary
exterior derivative on higher degrees and then collecting terms
appropriately.
dθIα = dxi ∧ θIiα
A basis element of Ωp, q has the form fdxi1 ∧ … ∧ dxip ∧ θI1α1 ∧ … ∧ θIqαq
The action of dV is zero on everything except f, on which it introduces an extra factor of θ, sending q → q + 1
The action of dH acts on f and on θ, introducing an extra dx factor, sending p → p + 1
Ω•(J∞E) is bigraded by wedge products of the underlying coordinates of the manifold M and wedge products of the contact forms.
Horizontal degree: Only goes up to the
dimension of the manifold M.
This degree corresponds to the dimension of the submanifold you're
integrating over.
Vertical degree: Can be arbitrarily
large. This degree corresponds to the number of infinitesimal
variations
Horizontal
Lagrangians: These live in Ωn, 0, taking
the form Ldx1 ∧ … ∧ dxn,
where L : J∞E → ℝn
Conserved currents: Noether's theorem
lives on Ωn − 1, 0
Vertical
We interpret elements of Ω0, q as taking in infinitesimal variations δiu and splitting out real numbers.
Euler-Lagrange equations: E ∈ Ωn, 1
takes in δu and spits
out $\dfrac{\delta L}{\delta u} \delta u
d^{n} x$
Source forms are elements of Ωn, 1 that have no contact forms of shape θI for |I| > 0.
Given a Langragian Ldx1…dxn, the vertical differential has a unique decomposition into
We think of smooth maps f : M → ℝn as sections of the trivial bundle M × ℝn → M.
The jet bundles Jk(M × ℝn) have the data of coordinates in M, coordinates in ℝn, and all partial derivatives up to order k.
Example: M = ℝ , n = 1. The second jet space J2(ℝ2) then
has dimension 4, with coordinates (x, u, ux, uxx).
Differential equations then define surfaces, like uxx + sin (u) = 0
Consider a Lagrangian L : J1(E) → ℝ. The actual Lagrangian density is then ℒ = L(x, u, ux)dx ∈ Ω1, 0.
In order to take the first variation, we apply the vertical differential.
$$ d_{V} \mathcal{L} = ( \dfrac{\partial L}{\partial u} \theta + \dfrac{\partial L}{\partial u_{x}} \theta_{x}) \wedge dx $$
Now we define $\eta = \dfrac{\partial L}{\partial u_{x}} \theta_{x} \in \Omega^{0,1} $
dH(θIα) = dxi ∧ θIiα dHf = (∂if + ∑|I| ≥ 0uIiα)dxi
We have $d_{H} \eta = (\partial_{x} \dfrac{\partial L}{\partial u_{x}})dx \wedge \theta + \dfrac{\partial L}{\partial u_{x}} dx \wedge \theta_{x} $
We get that $$ d_{V} \mathcal{L} = (\dfrac{\partial L}{\partial u} - \partial_{x} \dfrac{\partial L}{\partial u_{x}} ) \theta \wedge dx - d_{H} \eta $$
We define $E(\mathcal{L}) = (\dfrac{\partial L}{\partial u} - \partial_{x} \dfrac{\partial L}{\partial u_{x}} ) \theta \wedge dx $
In general: For any Lagrangian, we have
dVℒ = E(ℒ) + dHη
Noether's theorem: $\eta = \dfrac{\partial L}{\partial u_{x}}
\theta_{x} \in \Omega^{0,1} $
An infinitesimal symmetry is a prolonged vector field from E.